Fulton County, Georgia
HVAC Code Checklist
Make sure your hvac work meets local building codes before the inspector comes out. Covers Fulton County requirements based on Georgia State Minimum Standard Plumbing Code (based on IPC 2021).
Free to try. Works on your phone.
What's in the checklist
- ✅ Equipment — clearance, leveling, condensate drain
- ✅ Ductwork — sealing, insulation, support, sizing
- ✅ Ventilation — outdoor air, exhaust fans, combustion air
- ✅ Refrigerant lines — sizing, insulation, slope
- ✅ Thermostats & controls — location, programming, lockout settings
- ✅ Heat pump backup heat — auxiliary strip heat sizing
- ✅ GA energy code — duct sealing and insulation requirements
Based on Georgia State Minimum Standard Plumbing Code (based on IPC 2021)
Frequently asked questions
Does a hvac project in Fulton County need a permit?
Most hvac work in Fulton County, Georgia requires a building permit before construction. CodeCheckHQ helps you verify your work meets Georgia State Minimum Standard Plumbing Code (based on IPC 2021) requirements before the inspector arrives.
What codes apply to Fulton County hvac work?
Fulton County follows Georgia State Minimum Standard Plumbing Code (based on IPC 2021) with local amendments. CodeCheckHQ checklists are derived from these codes and reflect state-level modifications.
How long does a hvac inspection take in Fulton County?
A typical hvac inspection in Fulton County takes 30-60 minutes. Pre-walk the CodeCheckHQ checklist to identify and fix issues before scheduling.
Can I use CodeCheckHQ for a Fulton County hvac self-inspection?
Yes. CodeCheckHQ is a pre-inspection self-audit tool — not a replacement for the official AHJ inspection. Use it to catch issues early; official approval must come from a licensed inspector.
Don't guess. Check it now.
Fulton County building code requirements in plain English. Mark each item Pass, Fail, or N/A. Get a PDF report.